Audiovox FP1210 User Manual page 11

Connecting the TV / Monitor to an RCA device
n
Connect the supplied RCA Audio/Video signal cable as follows:
Yellow: Composite Video Out on your DVD, VCR etc. to the
Composite VIDEO Input connector on the TV/Monitor.
White: Left Audio Output on your DVD, VCR etc. to the L AUDIO
Input on the TV/Monitor.
Red: Right Audio Output on your DVD, VCR etc. to the R AUDIO
Input on the TV/Monitor.
n
Connect the small end to the power adapter to the DC 12V input
on the back of the TV/Monitor. Connect the AC power cord to a
suitable AC power wall socket.
Note:
This monitor is set to operate using a 100-240 volt AC, +/- 10%,
50/60Hz power supply. If the voltage in your home is different from this,
consult your dealer.
11