Table of Contents
Advertisement
Using Your Cooktop
Optional
Cooktop Cartridges
To Remove Cartridges
The grill accessory may be removed and an electric surface
1. Controls must be OFF and the cartridge should be cool.
cooking cartridge may be installed, Cooktop cartridge options
2. Remove the air grille.
include conventional coil, halogen, or radiant. Contact your
3. Lift the cartridge side next to the ventilation chamber until
dealer or call 1-800-JENN-AIR to purchase,
the top of the cartridge is about 3 inches above the
in the receptacle could damage the terminal plug.
I \
_
4. To disengage terminal, hold cartridge by the ventilation
(_)
chamber side and gently pull from the terminal receptacle.
Lift out when fully unplugged.
....
5. Do not stack cartridges where they may fall or be dam-
aged.
Never store other materials on top of a glass-
ceramic cartridge since this could damage or mar the
surface.
Note: Remember to replace the air grille before using the
ventilation system.
Home Canning
To Install Cartridges
Whencanningwithelectriccartridges, usetheconventionalcoil
1. If the grill grates, element, and/or grill liner pans are in
cartridge only, Model AC110.
Canning element accessory,
place, remove before installing a cooktop cartridge. Clean
Model A145A, makes it possible to use large oversized canners
basin pan of any grease accumulation. (See page 12 for
withtheconventionalcoilcartridge. Foradditionalinformation,
cleaning recommendations.)
refer to use and care rnanualpackaged with your cartridge.
2. To install any of the optional cooktop cartridges, be sure
controls are OFF, basin pan is in place, and air grille is
removed.
3. Position the cartIidge terminal plug towards the terminal
receptacle. Slide the cartridge towards thereceptacle until
the cartridge terminal plug is completely engaged. Lower
the opposite side of the cartridge into the cooktop until it
is flush with the surface.
4. Replace the air grille. Your cooktop is now ready to use.
Advertisement
Table of Contents
