Updating Procedure - Yamaha DCD1+PS Operation Manual

Updating Procedure

In the DCD1+PS, PianoSmart Playback is
possible by updating your Control Unit. Be sure
to update the Control Unit before using.
The update FD is different depending on the
Control Unit that you are using.
Use the Update Disk "CTRL-V3" when the
Control Unit is DKC50R, DKC500RWXG,
DKC500RW, or DSR1, and use Update Disk
"CTRL-V4" when the Control Unit is DKC55.
To perform this update:
1
Set the MAINS switch to ON.
For details about the MAINS switch, refer
to your piano's manual.
2
Press [STANDBY / ON] on the
front panel of the Control Unit
while depressing [PLAY].
The following message appears on the
display. The control unit's current flash
ROM version is now displayed.
3
To continue updating, press
[ENTER] twice.
ENTER
4
Insert the update disk.
The following message appears on the
display.
2
5
Press [+/YES] to begin the update.
–/NO +/YES
Note: Do not eject disk while system is being
updated.
After a short time, the following message
appears on the display.
6
Press [STANDBY / ON] on the
Control Unit.
Update is now complete.