Vita-Mix 7500 Owner's Manual page 6

Pro-750 Model
1. On / Off Switch:
The On/Off (or Power) Switch is on the right-hand side of the machine base. The On/Off Switch controls the power to the machine.
BEFORE moving the On / Off Switch to the On (I) position, make sure that the marker on the Variable Speed Dial is pointed at
the Stop Symbol ( ) at the top of the dial. Move the On / Off Switch to the Off position at night and whenever the machine is
left unattended. If the On / Off switch is moved to the Off position to stop a program mid-cycle, wait 30 seconds for power
to recycle and the timer to reset before moving the On / Off switch back to the On position. When the Pulse, Start / Stop, and
Program Symbols brighten, the On / Off Switch is in the On position and power is flowing.
2. Start ( ) / Stop ( ) Switch:
After the marker on the Variable Speed Dial is rotated from the Stop Symbol ( ) either to Variable Speed 1 or a Program, press the
Start / Stop Switch to start the machine and initiate the blending process. Pressing the Start / Stop Switch again will stop the
blending process.
Programs can be interrupted by pushing down the Start / Stop switch at any time. If reactivated by pushing down the Start / Stop
switch, the program will start at the beginning.
3. Pulse Switch ( ):
Variable Speed: Pressing down on the Pulse Switch will cause the machine to blend at the speed setting shown on the Variable Speed
Dial for as long as the Pulse Switch is held down.
Programs: The Pulse function can be used when a program is selected. Pushing down the Pulse switch when a program is selected
will cause the machine to run at 50% of high power for as long as the Pulse switch is pushed down.
To Avoid Possible Burns, Never Start on Speeds Above 1 when
Processing Hot Liquids.
Escaping steam, splashes or contents may scald.
To secure the contents, lock the lid and lid cap securely in place prior to
operating the machine.
Always start on Variable 1, then slowly increase to 10.
4. Variable Speed Dial:
The Variable Speed Dial serves two functions: the use of five program settings or ten variable speed settings.
• Programs: rotate the Variable Speed Dial to the left to the desired program.
• Variable Speed:
a. Rotate the Variable Speed dial to the right to 1.
b. Press down on the Start / Stop switch.
c.
Rotate the Variable Speed dial to the right or left during blending to increase or decrease the speed of the blades.
d. At the end of the blending cycle, rotate the marker on the Variable-Speed dial back to the Stop Symbol ( ) at the top of
the dial.
5. Programs:
The Pro-750 is equipped with five program settings for the most commonly used recipes. Rotating the Variable Speed Dial left of
center allows you to select a program for Smoothies, Frozen Desserts, Soups, Purées and a Cleaning cycle.
6
CO N T R O L PA N E L (CO N T I N U E D)
5
3
CAUTION
4
2
1