HP HSR6800 Installation Manual page 116

LED
(green)
(green)
Figure 101 SFE-X1 LEDs
Table 43 SFE-X1 LED description
LED
(green)
Status
Off
ACT
Steady on
Off
Slow flashing (1
Hz)
RUN
Fast flashing (8 Hz)
Status
Off
Slow flashing
(1 Hz)
RUN
Fast flashing (8
Hz)
Description
The MPU is in standby state.
The MPU is in active state.
No power input is available, or the MPU has failed.
The MPU is operating correctly.
The application software is being loaded.
CAUTION:
To avoid the hardware damage, do not power off the router or
insert or remove the MPU.
Description
No power input is available, or the MPU has failed.
The SFE-X1 is operating correctly.
The application software is being loaded or the SFE-X1 is not
started.
CAUTION:
To avoid the hardware damage, do not power off the router, or insert
or remove the SFE-X1 when the application software is being loaded.
110