Bose AR1 Owner's Manual page 6

Svenska Nederlands
E
XPANDING YOUR AUDIO LINK
Figure 2
Power pack
connection to
the AR1 and AC
power
The Status LED lights to verify this power connection.
Note:
lights, refer to "Check the indicators and settings" on page 8.
Instructions for non-Bose or older Bose
The AR1 receiver can connect to some products that are not
Bose
• Non-Bose products like a tuner/receiver or powered speaker
• Bose powered speakers, a radio, or system with its own
Any of the above products require the use of an RCA to DIN
adapter cable for connecting to the receiver. An adapter kit,
which contains two of these cables, is available from Bose.
Note:
Number 285320-207. For Bose contact information, refer to the
address sheet included in the carton.
To use an adapter cable:
The RCA connectors are color-coded, red for right and white
for left.
1.
2.
6
Italiano Français
Receiver
Power cable
For information on the meaning of the different Status LED
®
link-compatible, including:
system
volume and on/off controls and line-level female RCA input
jacks connected to the receiver.
To order the adapter kit, contact Bose and request Part
Insert the adapter cable DIN connector into the Bose link
jack on the receiver (OUTPUT).
Insert the adapter cable RCA connectors into the Audio In
jack on the expansion room product. Match left to left and
right to right.
Español Deutsch
AC (mains) power outlet
Power cord
Power pack
Dansk English
®
products