Bose Link AL8 Owner's Manual

Bose Link AL8 Owner's Manual

Homewide wireless audio link
Hide thumbs Also See for Link AL8:

Advertisement

Quick Links

BOSE
Link AL8
®
H O M E W I D E W I R E L E S S A U D I O L I N K
Get user manuals:
See SafeManuals.com

Advertisement

Table of Contents
loading

Summary of Contents for Bose Link AL8

  • Page 1 BOSE Link AL8 ® H O M E W I D E W I R E L E S S A U D I O L I N K Get user manuals: See SafeManuals.com...
  • Page 2 Clean only with a dry cloth – and as directed by Bose Corporation. Unplug this product from the wall outlet before cleaning.
  • Page 3: Table Of Contents

    Instructions for non-Bose or older Bose products ........
  • Page 4: Introduction

    NTRODUCTION The Bose link AL8 Homewide Wireless Audio Link Congratulations on your choice of Bose to provide an audio expansion solution free from the need to run cumbersome wires between rooms. The audio link consists of a transmitter and receiver. They deliver audio signals from your LIFESTYLE ®...
  • Page 5: What Distinguishes The Two Units

    Bose ® link expansion product. Note: Use of the audio link with products that are not Bose link-compatible requires an adapter ® cable. For further information, refer to “Instructions for non-Bose or older Bose products”...
  • Page 6: Setup

    1. Connect one end of a Bose link A cable to the jack labeled Bose link INPUT on the transmitter connection panel. 2. Connect the other end of the cable to the Bose link speaker jack, below the Main Speaker jack, on the LIFESTYLE ®...
  • Page 7: For The Receiver

    A cable to the jack labeled Bose ® link OUTPUT on the receiver. 2. Connect the other end of the cable to the Bose link Input jack on the expansion room system, amplifier, or powered speaker (Figure 5). Figure 5 Connection to a...
  • Page 8: Instructions For Non-Bose Or Older Bose Products

    An adapter kit, which contains two of these cables, is available from Bose. Note: To order the adapter kit, contact Bose and request Part Number 285320-207. For Bose contact information, refer to the address sheet included in the carton.
  • Page 9: Check The Indicators And Settings

    Svenska ETUP To control volume when a non-Bose product is the sound source: • There is no need for an expansion room remote control. • Use the remote that came with the tuner/receiver in the room where it is connected to the transmitter.
  • Page 10: Your Bose Link Expansion Room Remote Control

    Bose link product. Enjoy your wireless entertainment With the settings confirmed, your Bose link AL8 Homewide Wireless Audio Link is ready for use. To explore and enjoy all of the capabilities provided by your expansion products, refer to the owner’s guide provided with each product.
  • Page 11: Reference

    – the system, amplifier, or powered speaker is plugged in and turned on. On an SA-2 or SA-3 amplifier in that room, make sure the Status LED is lit to indicate the amplifier is working. – the room code is set on the Bose link remote control or PERSONAL ® music center II to match the room codes on the amplifier or powered speaker and are unique to this expansion room.
  • Page 12: Contacting Customer Service

    Details of the limited warranty are provided on the Product Registration Card that came with your system. Please fill out the information section on the card and mail it to Bose. Failure to do so, however, will not affect your limited warranty rights.
  • Page 13: Technical Information

    English Dansk Deutsch Español Français Italiano Nederlands Svenska EFERENCE Technical Information Power rating 9.5V 1.0A Power supply rating Input: 220-240V 50Hz 60mA Output: 9.5V 1.0A Operating temperature range to 40 C (32 to 104 Frequency band 2.4000 GHz to 2.4835 GHz Transmitter Audio Input Level 2 Vrms (fixed) Receiver Audio Output Level...
  • Page 14 Get user manuals: See SafeManuals.com...

Table of Contents