Related Manuals for Bose SL2
Summary of Contents for Bose SL2
- Page 1 W I R E L E S S S U R R O U N D L I N K Owner’s Guide Brugervejledning Bedienungsanleitung Guía de usario Notice d’utilitsation Manuale di istruzioni Gebruiksaanwijzing Bruksanvisningen...
-
Page 2: Safety Information
Clean only with a dry cloth – and as directed by Bose Corporation. Unplug this product from the wall outlet before cleaning. -
Page 3: For Your Records
20 centimeters (8 inches) from users and others. For Your Records Serial numbers are located on the bottom of the SL2 transmitter and the SL2 receiver. Serial numbers: SL2 Transmitter_____________________________ SL2 Receiver ________________________ Dealer name: __________________________________________________________________________________... -
Page 4: Getting Ready
A box with dotted lines identifies parts that vary with different product versions or in different countries. Now is a good time to find the serial numbers on the bottom of the SL2 transmitter and receiver. Copy them onto your product registration card and in the space provided on “For Your Records”... -
Page 5: Making The Connections
SL2 transmitter at its receiver, you can hide the two from view if you like. The SL2 transmitter, which is labeled on the back, is also distinguished by the single RCA jack (Figure 2). The SL2 receiver, also labeled on the back, has two RCA jacks. - Page 6 WIRELESS SURROUND LINK Connecting the SL2 transmitter Use the supplied transmitter cable to connect the SL2 transmitter to your Acoustimass module, as follows (Figure 3): 1. Insert the single RCA connector at one end of the cable into the RCA jack labeled Acoustimass Module on the back of the SL2 transmitter.
- Page 7 Jewel Cube speakers When this power supply is plugged in, the Status LED on the back of the SL2 receiver blinks green. If both power supplies are connected and plugged in, the Status LEDs on both the SL2 transmitter and receiver light a solid green to indicate the two are in communication.
- Page 8 Important Note: Running the ADAPTiQ your LIFESTYLE to use it after the SL2 is connected and your surround speakers are in final position. If your speakers are part of an Acoustimass the bottom of the SL2 transmitter to Other (Figure 6).
-
Page 9: Troubleshooting
Knowing what the Status LEDs indicate On the rear of the SL2 transmitter and receiver, the color of the Status LED indicates how each unit is functioning. The indicators include: • Blinking green: when the power pack is plugged in •... -
Page 10: Limited Warranty
Details of the limited warranty are provided on the Product Registration Card that came with your SL2 Wireless Surround Link. Please fill out the information section on the card and mail it to Bose. Failure to do so, however, will not affect your limited warranty rights... -
Page 11: Warranty Information
Pay shipping or transportation charges from you to us. What you must do to obtain Limited Warranty Service: 1. Return product with proof of purchase from an authorized Bose dealer directly to Bose Corporation. If you elect to return the product directly to Bose Corporation, the following... - Page 12 WIRELESS SURROUND LINK 2. Return product with proof of purchase from an authorized Bose dealer to a Bose Service Agency. Exclusive remedy: This Limited Warranty is fully transferable provided that the current owner furnishes the origi- nal proof of purchase from an authorized Bose dealer. THE MAXIMUM LIABILITY OF BOSE SHALL NOT EXCEED THE ACTUAL PURCHASE PRICE PAID BY YOU FOR THE PRODUCT.
- Page 13 ©2005 Bose Corporation, The Mountain, Framingham, MA 01701-9168 USA 291706 AM Rev.00 CCM-002607...