Error Display - Omron HN-286 Manual

The scale depends on the attached battery. Please pull out the battery
Open the battery cover.
insulation film before use and change the battery when it low power.
Open the battery cover.
Be sure to use the specified type of batteries.
When you install the battery for the first time
Full display after battery placement
When you install the battery for the first time
When installing the battery, do not mistake the
Full display after battery placement
Display after 1-2 seconds
directions of
Make initial setup （ zero adjustment before measurement）
Display after 1-2 seconds
During out-of-service period (about 3 months
Place the scale horizontally on a flat ground.
Make initial setup （ zero adjustment before measurement）
or above) of the product, remove the battery.
The power turns off after the scale displays the
value automatically (Note: the value 1.5 is for instance) Place the scale horizontally on a flat ground.
Note: If it is not placed horizontally, incorrect measurement may occur. The power turns off after the scale displays the
When discarding the battery, please follow relevant provisions
value automatically (Note: the value 1.5 is for instance)
on environmental protection.
Measurement
Note: If it is not placed horizontally, incorrect measurement may occur.
The scale will show the value when the user stands
Product Features
Measurement
stably on the center of platform.
When (kg) is displayed, the measurement ends. The scale will be
The scale will show the value when the user stands
(1) High precision: the smallest display unit is 0.1Kg.
automatically turned off after 16 seconds. If you stand in an unstable
stably on the center of platform.
(2) Large-size Display: 38mm x 77mm
manner, the display value will flash and automatically shut down
When (kg) is displayed, the measurement ends. The scale will be
10 seconds later.
automatically turned off after 16 seconds. If you stand in an unstable
(3) High standard toughened glass is used on the surface of the weight scale.
manner, the display value will flash and automatically shut down
(4) Automatic startup feature (for immediate measurement), and automatic
10 seconds later.
power off features (power is cut off 16 seconds after measurement).

Error Display

Error
Error Display
symbol
Error
The battery is running out
symbol
The weight measured is beyond
The battery is running out
the measurement scope
The weight measured is beyond
Measurement error
the measurement scope
About the battery
Measurement error
(1) If the display shows
About the battery
Please replace the battery.
(1) If the display shows
(2) The battery is one 3V lithium battery.
Please replace the battery.
(3) sign may not appear when old battery is used.
(2) The battery is one 3V lithium battery.
(4) Battery life is approximately 1 year (measured 4 times a day).
(3) sign may not appear when old battery is used.
(5) Remove the battery when not using the unit for a long time. In addition
(4) Battery life is approximately 1 year (measured 4 times a day).
the unit with installed battery is not used for long time, it may cause
Put one 3V lithium battery
into the battery box
Tips
(positive pole upward)
Put one 3V lithium battery
and then tightly close the
into the battery box
battery box.
(positive pole upward)
and then tightly close the
battery box.
pole.
Cause
Cause
it means the battery is running out.
it means the battery is running out.
Solutions
Change the battery
Solutions
Change the battery
Repeat Measurement
Repeat Measurement