Audiovox 50-0300A-002 SERIES Installation Instructions Manual page 4

7. Remove and retain (2) two O.E. screws from bracket.
See Figure 4.
8. Carefully pull back edge molding from rear of
sunroof opening. See Figure 4.
FIGURE 5
9. Insert mounting bracket (item 5 pg. 2) into headliner.
Slide bracket forward between headliner and roof
until tab engages O.E. roof panel. Align hole in
bracket with center rivet on roof panel.
See Figure 5.
10. Secure rear of bracket using (2) two O.E. screws,
previously removed.
11. Slide edge molding back into original position
around sunroof opening.
4
FIGURE 4