Programming Worksheets - DSC PC560 User Manual

PROGRAMMING WORKSHEETS

[01] Zone Definitions
NOTE: When defining zones, assign Delay Zones starting with Zone 1, then Zone 2, and so on.
Then, assign the other zone types to the remaining zones in any order desired.
Default
0 0
0 1
0 2
0 2
[02] System Times
Default
0 3 0
1 2 0
0 0 4
Valid entries are "001" to "255"; do not enter "000".
[03] Installer's Code
Default
0 5 6 0
[04] Programmable Output Options (PGM Terminal)
Default
0 1
[05] First System Option Code
Default
OFF
ON
OFF
OFF
Page 13
Zone 1
Zone 2
Zone 3
Zone 4
Page 14
Entry Delay (seconds)
Exit Delay (seconds)
Bell Cut-off (minutes)
Page 14
Programmable Output
Page 15
Zone Light ON
Zone Light 1 Momentary Keyswitch
Zone Light 2 [P] Key: silent alarm
Zone Light 3 KEY Terminal is tamper zone
Zone Light 4 Police Code enabled
Digit 1
[0] Audible
[1] Silent
Page 14
∗
[01] [ ][7] Utility Output Command activates PGM
[02] PGM follows Keypad Buzzer
[03] Arm/Disarm Status
[04] Remote Operation (through Downloading)
Digit 2
[0] Standard Delay
[1] Instant
[2] Interior
[3] Stay-Away with Delay
[4] 24-Hour Bell
[5] 24-Hour Pulsed Alarm
Zone Light OFF
Maintained Keyswitch
[P] Key: audible alarm
Keyswitch operation
Police Code disabled
19