Model 3830 S-Registers; S-Register List - Paradyne COMSPHERE 3830 User Manual

COMSPHERE 3800 Series Modems – Model 3830

S-Register List

S-Registers affect the operating parameters of the Model 3830 modem.
These registers are applicable only when the DTE Dialer Type
configuration option is set for AT. (See &Mn and &Qn commands.)
S-Registers can be displayed and/or modified when the modem is in
Command mode. To display the value of an S-Register, issue the
following command:
TYPE:
Where:
PRESS:
To modify the value of an S-Register, issue the following command:
TYPE:
Where:
PRESS:
Table 4-3
S0 Auto-Answer Ring Number
Determines the number of rings the modem will count before
automatically answering a call.
Enter zero (0) if you do not want the modem to automatically answer any
calls. Otherwise, enter a value from 1–255 for the number of rings to
count before answering. Note that if disabled, the modem can only
answer with an ATA command.
Factory setting is 1.
4-30
ATSn?
n is the register number.
Enter
ATSn=r
n is the register number, and r is the new value.
Enter
lists all S-Registers supported by the Model 3830.
Table 4-3
(1 of 20)

Model 3830 S-Registers

August 1998 3830-A2-GB91-30