HEIDENHAIN iTNC 530 User Manual page 11

Feature content level (upgrade functions)
Along with software options, significant further improvements of the
TNC software are managed via the Feature Content Level (FCL)
upgrade functions. Functions subject to the FCL are not available
simply by updating the software on your TNC.
All upgrade functions are available to you without surcharge
when you receive a new machine.
Upgrade functions are identified in the manual with FCL n, where n
indicates the sequential number of the feature content level.
You can purchase a code number in order to permanently enable the
FCL functions. For more information, contact your machine tool
builder or HEIDENHAIN.
FCL 4 functions
Graphical depiction of the protected
space when DCM collision monitoring is
active
Handwheel superimposition in stopped
condition when DCM collision
monitoring is active
3-D basic rotation (set-up
compensation)
FCL 3 functions
Touch probe cycle for 3-D probing
Touch probe cycles for automatic datum
setting using the center of a slot/ridge
Feed-rate reduction for the machining of
contour pockets with the tool being in
full contact with the workpiece
PLANE function: Entry of axis angle
User documentation as a
context-sensitive help system
smarT.NC: Programming of smarT.NC
and machining can be carried out
simultaneously
HEIDENHAIN iTNC 530
Description
Page 353
Page 352
Machine Manual
Description
User's Manual for
Cycles
User's Manual for
Cycles
User's Manual for
Cycles
Page 420
Page 158
Page 117
11