Kyocera FS-1800 Service Manual page 46

Key
4 GO key
5 CANCEL key
6 MENU key
7
key
8
key
9 < key
0 > key (
key)
! ENTER key
Function
• Switches the printer on-line and off-line.
• Prints and feed out one page.
• Cancels a printing job.
To cancel a print job, proceed as follows:
1. Check the message Processing is displayed in the message
display.
2. Press the CANCEL key.
3. The message Print Cancel? will appear in the message display
and the interface to be canceled will be displayed.
Parallel
Serial
Option (appears only when an [option] network interface card is
installed)
Press the CANCEL key again if you wish to stop the cancellation of
printing.
4. Selecting the interface to cancel using the
the ENTER key. Printing from the interface selected will be stopped.
The Cancelling data message appears in the message display
and printing stops after the printer finishes printing the current page.
• Resets numeric values, or cancels a setting procedure.
• Stops the sound alarm that indicates the occurrence of an error.
• Enter menu mode
• When pressed during menu selection, terminates the setting and returns
to the Ready condition.
Lets you access the desired item or enter numeric values. In some of the
control procedures, the < and > keys are used to enter or exit the sub items.
Enables access to the desired item or entering of numeric values. In some
of the control procedures, the < and > keys are used to enter or exit the sub
items.
Used as the < key in the menu selection.
• Used as the > key in the menu selection.
• Displays on-line help messages on the message display when paper jam
occur. When pressed in the Ready condition, displays on-line help
messages.
Finalizes numeric values and other selections in menu selection.
2-19
or key. Then press
FS-1800/1800N | FS-3800/3800N