Advertisement
3/8"
LOW HEIGHT
/
FIGURE 3
STEP 3:
¯ SECURELY assemble one 3-1/2" PULLEY (11), two 2" WHEELS (16), two 3/8" FLAT WASHERS
(17):.
and two 3/8 ID
SPACERS (29) to the ADJUSTMENT
TUBE (7) using one 3/8 X 4-1/2" BOLT (26) as shown in FIGURE
¯ Attach four PARAGLIDE
STRIPS (14) to the outside of the ADJUSTMENT
TUBE (7) using the followirtg steps:
¯
Thoroughly clean all surfaces where the PARAGLtDE
STRIPS (14) are to be attached.
¯
Remove the PARAGLIDE
STRIPS (t4) from the paper backing and firmly apply them to all shown surfaces.
1/2
I
1/2
I
1/2
I
1/2
I
1/2
I
1/2
I
3
4
5
6
Advertisement
