Advertisement
FIGURE 11
STEP 11:
Route the threaded end of the 124" CABLE (I 1) through the slot oft.he UPRIGHT
(1) then SECURELY
assemble one 4-1/2" PULLEY
(10) to the UPRIGHT
(I) using m'o 3/8 X 2-3/4" BOLTS (32), two 3/8" FLANGE
SPACERS
(33), two 3/8" W~_SHERS
(30), and
LOCK NUTS (31). (NOTE: The CABLE (11) should be muted bem'een the pulley and the retaining bolt as :~hown in FIGURE
10
Advertisement
