Advertisement
FIGURE 4
318 X 4
LOWER
CROSS SUPPORT
"
STEP 4:
¯ NOTEi It may be necessa~" to loosen the 1/2 X 3-1/4" BOLTS of the LOWER CROSS SUPPORT connecting to the IiPRIGI~IT
FR.~%IE before beginnlngSTEP 4.
¯
SECURELY assemble the STACK BASE (3) and the UPRIGHT (1) to the LOWER CROSS SUPPORT using two 3/8 X 4" BOLTS (38).
four 3/8" WASHERS (30), and two 3/8" LOWHEIGHT
LOCKNUT5 (29). See FIGURE
¯ Pull back on the SPREgG PEg (21) and C.~REFULLY
insert the ADJ. FOOT SUPPORT (2) into the STACK BASE (3) as shox~'n
FIGLrRE 4.
¯ Retighten the 1/2 X 3-1/4" BOLTS loosened in the above STER
STEP 5:
¯ Sn.ap two Vc~IGHT PLATE BUSHEgGS (28) into the
top of all twenty WEIGHT PLATES (40) as shown
FIGURE 5.
Advertisement
