[3] Transmittable documents
1. Document Sizes
width
Normal size
length
(Max.)
Letter
(Min.)
size
140mm
148mm
216mm
[Normal size]
Use document carrier sheet for smaller documents.
* With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
4x6 series
(788mm x 1091mm x
1000mm sheets)
Minimum
Feeder capacity
10 sheets, max.
Paper weight
45kg
Paper thickness (ref.)
0.06mm
Paper size
B6 (128mm x 182mm) ~
A4 (210mm x 297mm), Letter (216mm x 279mm)
3. Document Types
• Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain
pen, ball-point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine
can also be transmitted.
• Diazo copy (blue print)
Diazo copy documents of a normal contrast may be transmitted.
• Carbon copy
A carbon copy may be transmitted if its contrast is normal.
4. Cautions on Transmitting Documents
• Documents written in yellow, greenish yellow, or light blue ink cannot
be transmitted.
• Ink, glue, and correcting fluid on documents must be dry before
the documents can be transmitted.
• All clips, staples and pins must be removed from documents be-
fore transmission.
• Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
• All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
5.8" – 8.5"(148 – 216 mm)
5.5" – 11"(140 – 279 mm)
(Max.)
1000mm
279mm
216mm
[Special size]
Square
meter series
Maximum
Minimum
Maximum
2
64.3kg
52g/m
74.3g/m
0.09mm
0.06mm
0.09mm
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at anytime is as
follows:
Normal size: max. ADF 10 sheets
Special size: single sheet only (manual feed)
•
NOTES:
When you need to send or copy more pages than the feeder
limit, place additional pages in feeder when last page in
feeder is being scanned.
•
Place additional pages carefully and gently in feeder.
If force is used, double-feeding or a document jam may
result.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
•
Readable width
8.3" (210mm), max.
2
•
Readable length
This is the length of the document sent minus 0.2" (5mm) from the top
and bottom edges.
1 – 3
UX-340L/UX-345L
UX-330L
Readable width
0.2"(5mm)
Readable length
0.2"(5mm)