Transmittable Documents - Sharp UX-108 Service Manual

[3] Transmittable documents

1. Document Sizes
width
Normal size
length
(Max.)
Leter size
(Min.)
279mm
140mm
148mm 216mm
[Normal size]
Use document carrier sheet for smaller documents.
* With special sizes, only one sheet can be fed into the machine at a
time. Insert next page into feeder as current page is being scanned.
2. Paper Thickness & Weight
Thickness
ADF 10
sheets
Weight
Normal size
Thickness
ADF 20
sheets
Weight
Thickness
Special size
Weight
3. Document Types
• Normal paper
Documents handwritten in pencil (No. 2 lead or softer), fountain pen,
ball-point pen, or felt-tipped pen can be transmitted.
Documents of normal contrast duplicated by a copying machine can
also be transmitted.
• Diazo copy (blue print)
Diazo copy documents of a normal contrast may be transmitted.
• Carbon copy
A carbon copy may be transmitted if its contrast is normal.
4. Cautions on Transmitting Documents
• Documents written in yellow, greenish yellow, or light blue ink cannot
be transmitted.
• Ink, glue, and correcting fluid on documents must be dry before the
documents can be transmitted.
• All clips, staples and pins must be removed from documents be-fore
transmission.
• Patched (taped) documents should be copied first on a copier and
then the copies used for transmission.
• All documents should be fanned before insertion into the feeder to
prevent possible double feeds.
5.8" – 8.5"(148 – 216 mm)
5.5" – 11"(140 – 279 mm)
(Max.)
600mm
216mm
[Special size]
–3 –3
2.4 x 10 –4.7 x 10 inch
(0.06–0.12 mm)
–3 2
0.15 x 10 lbs/inch
2
(52–104g/m )
(14–28lbs)
–3 –3
2.4 x 10 –3.5 x 10 inch
(0.06–0.09 mm)
–3 –3
0.77 x 10 –0.11 x 10 lbs/inch
2
(52–74.3g/m )
(14–20lbs)
–3 –3
4.7 x 10 –7.9 x 10 inch
(0.12–0.20 mm)
–3 –3
0.15 x 10 –0.20 x 10 lbs/inch
2
(52–157 g/m
)
5. Automatic Document Feeder Capacity
Number of pages that can be placed into the feeder at anytime is as
follows:
Normal size: max. ADF 20 sheets (14 lbs – 20 lbs)
Special size: single sheet only (manual feed)
•
NOTES: When you need to send or copy more pages than the feeder
limit, place additional pages in feeder when last page in
feeder is being scanned.
•
Place additional pages carefully and gently in feeder.
If force is used, double-feeding or a document jam may
result.
6. Readable Width & Length
The readable width and length of a document are slightly smaller than
the actual document size.
Note that characters or graphics outside the effective document scan-
ning range will not be read.
•
Readable width
210 mm, max.
2
2
•
Readable length
This is the length of the document sent minus 0.16" (4 mm) from the top
and bottom edges.
1 – 3
UX-108U/178U/188U
FO-375U
Readable width
0.16"(4mm)
Readable length
0.16"(4mm)