Printer Engine Service Mode
5.3 PRINTER ENGINE SERVICE MODE
5.3.1 SERVICE MODE TABLE
Notation
[range/default/step]
DFU
SP1-xxx: Feed
Lead Edge Regist
Adjusts the printing leading edge registration for feeding from the trays and
1001
duplex tray using the trimming area pattern (SP2-902f No. 12).]
Push [ ] or [
The specification is 4±2 mm
1001 001
Bypass Tray Plain
1001 002
Bypass Tray Thick
1001 003
Main Tray Plain
1001 004
Main Tray Thick
1001 005
Optional Tray
1001 006
Duplex
G176/G177/G176L
What it means
Example: [-9 to +9/+3.0/0.1 mm step]. The setting can be
adjusted in the range ±9, value reset to +3.0 after an NVRAM
reset, and the value can be changed in 0.1 mm steps with
each key press.
Denotes "Design or Factory Use". Do not change this value.
Leading Edge Registration
] to select the settings (plus or minus).
[-40 to +40/0/1]
5-4
SM