Connection Modes; Scsi Bus Connection Modes - Fujitsu MCE3064SS Product Manual

4.2

Connection Modes

Figure 4.2 shows examples of connections between the host system and the optical disk drive.
Up to eight devices including the host adapter, optical disk drive, and other SCSI equipment can
be connected to the SCSI bus in arbitrary combinations. Install a terminating resistor on the
SCSI devices connected to either end of the SCSI cable.
See Section 3.4 for the cable connection requirements and power cable connections.
(a) Connecting one optical disk drive
(b) Connecting more than one optical disk drive (single host)
4 - 4
Figure 4.2 SCSI bus connection modes (1 of 2)
C156-E097-01EN