Advertisement
Available languages
Available languages
ENGLISH
Table of contents
Installation manual with technical data
1.0 Regulatory information ................................12
2.0 Technical data ...............................................12
3.0 Installation ................................................... 13
4.0 Servicing ........................................................14
5.0 Optional Equipment .....................................14
Figures ................................................................... 31
General use and maintenance manual
6.0 Safety precautions
7.0
Choice of fuel
8.0 Use
9.0 Maintenance
10.0 Operational problems - troubleshooting
On all our products there is a label
Product:
Jøtul
indicating the serial number and
Room heater fired by solid fuel
year. Write this number in the
Standard
:
Minimum distance to adjacent combustible materials:
Minimum distance to adjacent combustible materials:
place indicated in the installation
Emission of CO in combustion products
:
Flue gas temperature
:
Nominal heat output
:
instructions.
Efficiency
:
Operation range
:
Fuel type
:
Operational type
:
The appliance can be used in a shared flue.
Always quote this serial number when
Country
Classification
Certificate/
Approved by
standard
contacting your retailer or Jøtul.
Norway
Klasse II
SP Sveriges Provnings- och
Sweden
SP
OGC
Forskningsinstitut AB
SP Swedish National
Testing and Research
EUR
Intermittent
EN
Institute
Follow user`s instructions. Use only recommended fuels.
Montage- und Bedienungsanleitung beachten.
Verwenden Sie nur empfohlenen Brennstoffen.
Respectez les consignes d'utilisation. Utilisez uniquement
les combustibles recommandés.
Serial no: Y-xxxx, Year: 200x
Manufacturer:
221546
Jøtul AS
POB 1441
N-1602 Fredrikstad
Norway
12
Serial no.
1.0 Relationship to the
authorities
Installation of a fireplace must be according to local codes and
regulations in each country.
those which refer to national and European standards, must be
observed when installing the product.
Both an installation manual with technical data and a manual
on general use and maintenance are enclosed with the product.
The installation can only be used after it has been inspected by
a qualified inspector.
A name plate of heat-resistant material is affixed to the
product. This contains information about identification and
documentation for the product.
2.0 Technical data
Material:
Cast iron
Finish:
Paint
Fuel:
Wood
35 cm
Log length, max.:
Operating range:
3,2 - 11 kW
Flue outlet:
Top
Flue dimension
(inside the outlet) :
Ø 150 mm/177 cm
Flue dimension
(outside the outlet) :
Ø 175 mm/240 cm
Approx. weight:
132 kg
Optional extras:
Cover for external air, damper
complete, convection chamber top
Dimensions, distances etc See fig.1
Technical data according to EN 13229
Nominal heat output:
Smoke gas mass flow:
Recommended chimney draught:
Effiency:
CO emission (13% O
):
2
Flue gas temperature:
Operating mode:
Intermittent combustion is here taken to mean normal use of a
fireplace. I.e. that a new flame chamber is lit as soon as the fuel
has burnt down to the appropriate quantity of embers.
Wood consumption
Jøtul I 350/I 350 FL has a nominal heat output of 8,0 kW.
Use of wood, with nominal heat emission: Approx. 2,6 kg/h.
Another important factor for proper fuel consumption is that
the logs are the correct size. The size of the logs should be:
Kindling:
Length: Approx 30 cm
Diameter: 2-5 cm
Amount per fire: 8 - 10 pieces
Firewood (split logs):
Recomended length: 30-35 cm
Diameter: Approx. 8 - 12 cm
Intervals for adding wood: Approximately every 45 minutes
Size of the fire: 2,0 kg
Amount per load: 3 stk.
Nominal heat emission is achieved when the air vent is open
approximately 50% (fig. 6B).
All local regulations, including
2
cross section
2
cross section
8,0 kW
8,7 g/s
11 Pa
73%@8,1 kW
0,13%
0
322
C
Intermittent
Advertisement
