Table of Contents
Advertisement
FIGURE 8
REMOVE CABLE
STEP 8
Remove the existing LAT CABLE using the following steps:
• Disconnect LAT BAR from TOP BOOM.
• Unscrew the threaded end of CABLE from the HEAD PLATE ASSEMBLY.
• Route the LAT CABLE around the PULLEY BLOCK as shown in FIGURE 8.
• Route the LAT CABLE around the TOP BOOM as shown in FIGURE 8.
• The pulleys in TOP BOOM may need to be temporarily removed to remove CABLE.
1/2
1/2
1/2
1/2
1/2
1/2
0
1
2
3
4
5
6
6
Hide quick links:
Advertisement
Table of Contents
