Advertisement
Universal Remote Control Programming
for Etisalat Set Top Boxes
The default Set Top Box protocol may be programmed in the field using
the following procedure:
• Press the <Home> key, <REC> key and <OK> key simultanously for
3 sec, STB indicator LED will give a conformation blink and remain on.
• Release the keys and press a <Digit> key to select the Default Protocol.
Refer to the table below for the protocol selection.
• The LED will blink, indicating that the Default STB Protocol has been
programmed; the number of blinks corresponds to the Protocol
number selected, i.e. 1 blink for Protocol 1, 2 blinks for Protocol 2, etc.
Sr. No.
1
2
3
4
5
6
7
SW Keys
STB Model
Digit2
Humax (eVision logo)
Digit4
Airties
Digit5
Kaon (Etisalat logo)
Digit6
Kaon (eVision logo)
Digit7
Huawei
Digit8
Pace
Digit9
Humax (Etisalat logo)
LED Confirmation
Two blinks
Four blinks
Five blinks
Six blinks
Seven blinks
Eight blinks
Nine blinks
3
Advertisement
