Advertisement
Quick Links
Advertisement
Related Manuals for One for All iLifeTV
Summary of Contents for One for All iLifeTV
- Page 1 Set-Top-Box Home Theater...
- Page 2 Universal Remote Control Key Map...
- Page 3 TV/AUDIO Mode Key Description STB Mode (or no TV/AUDIO programmed) TV programmed only TV+AUDIO programmed AUDIO programmed only Menu Menu Tools Tools Next Next Previous Previous Play/Pause play/pause Stop Stop TV Power Toggle TV Power toggle AUX Power toggle Power Power Toggle Forward Forward...
- Page 4 Universal Remote Control Programming for Etisalat Set Top Boxes The default Set Top Box protocol may be programmed in the field using the following procedure: • Press the <Home> key, <REC> key and <OK> key simultanously for 3 sec, STB indicator LED will give a conformation blink and remain on. •...
- Page 5 The Set top box protocol can be changed in the field to retune the RCU to another STB using the following procedure: • Press and hold key ‘Home’ and the relevant digit key together for a minimum of 3 seconds, until the STB indicator LED blinks two times (of 500 ms each). The new STB protocol is now programmed to non-volatile memory.
- Page 6 Quick Start Guide to set up the remote of your TV 1. Switch on your TV 2. Press and hold the TV button on your remote for 5 seconds. The TV button will light up. 3. Look up the 4-digit code for your brand (Look at page no.
- Page 7 Shortlist of brands Brands Brand Name Number Bang & Olufsen 0314 BenQ 0359 Blue Sky 0395 Bush 0445 Carrefour 0492 Daewoo 0692 Firstline 1008 Funai 1056 Grundig 1162 Hitachi 1251 Insignia 1368 1464 1628 Loewe 1660 Metz 1810 Mivar 1857 2017 Nokia Panasonic...
- Page 8 Turn on the TV/Audio • Press and hold the <<TV>> key for 3 seconds; until the setup LED lights up. This enables the protocol and brand selection function for the TV device, the mode LED will remain on. To enable selection for AUX device, press <Mute> key after hold <<TV>>...
- Page 9 • Press TV twice to confirm the code. The code that was selected when TV was pressed twice or when 4 sec timeout happened is the code that will be programmed into the remote. The RC will give a set-up confirmation blink and go back to normal operation.
- Page 10 In the case that brand number 0000 was selected the whole database of either TV or Aux is scanned. The device-LED shows a reverse blink for each transmission. • Note that the search sequence continues by going through the whole list after scanning through the brand list when all code-sets for the brand are tested.
- Page 11 After TV/Aux is also setup in addition to Etisalat STB set-up with the remote, the remote control will control the volume of the TV/Aux only and the STB volume control will not be managed from the remote any more. In case one prefers however to continue to control the volume via the STB and want the volume control to work for TV/Aux when selecting TV (pressing TV) and volume control to work for STB when selecting STB (pressing Home), the following need to be performed once.
- Page 12 www.etisalat.ae/elife For more information, please call or visit...