Pro-Form PFTL98115.0 User Manual page 17

16. Firmly tighten the four 3/8" x 2 1/4"
Screws (7), the two 3/8" x 1 3/4" Screws (62),
and the two 3/8" x 1 1/4" Screws (63). Note:
Do not overtighten the Screws (62). The
Wheels need to turn freely.
Next, set the Left Inner Base Cover (107) onto
the lower end of the Left Upright (89). Slide the
Left Base Cover (82) downward and press it
onto the Left Inner Base Cover.
Then, set the Right Inner Base Cover (23) onto
the lower end of the Right Upright (90). Slide the
Right Base Cover (83) downward and press it
onto the Right Inner Base Cover.
17. Press the two tabs on the Tablet Holder (105)
into the slots (L) in the console assembly (J).
Attach the Tablet Holder (105) to the console
assembly (J) with four #8 x 5/8" Machine Screws
(26). Note: Start the two top Machine Screws
fi rst, and then start the two bottom Machine
Screws. Be careful not to overtighten the
Machine Screws.
IMPORTANT: The Tablet Holder (105) is
designed for use with most full-size tablets.
Do not place any other electronic device or
object in the Tablet Holder.
18. Make sure that all parts are properly tightened before you use the treadmill. If there are sheets of plastic
on the treadmill decals, remove the plastic. To protect the fl oor or carpet, place a mat under the treadmill. To
avoid damage to the console, keep the treadmill out of direct sunlight. Keep the included hex keys in a secure
place; one of the hex keys is used to adjust the walking belt (see pages 34 and 35). Note: Extra parts may be
included.
16
83
63
90
7
17
Start First
26
17
89
63
7
62
23
62
105
J
L
82
107