Pro-Form PFTL98115.0 User Manual

Hide thumbs

Table Of Contents

www.proform.com

Model No. PFTL98115.0

Serial No.

Write the serial number in the space

above for reference.

Serial Number

Decal

ACTIVATE YOUR

WARRANTY

To register your product and

activate your warranty today,

go to www.proformservice.com/

registration.

CUSTOMER CARE

For service at any time, go to

www.proformservice.com.

Or call 1-888-533-1333

Mon.–Fri. 6 a.m.–6 p.m. MT

Sat. 8 a.m.–12 p.m. MT

Please do not contact the store.

CAUTION

Read all precautions and instruc-

tions in this manual before using

this equipment. Save this manual

for future reference.

USER'S MANUAL

Table of Contents

Summary of Contents for Pro-Form PFTL98115.0

Page 1 Model No. PFTL98115.0 USER’S MANUAL Serial No. Write the serial number in the space above for reference. Serial Number Decal ACTIVATE YOUR WARRANTY To register your product and activate your warranty today, go to www.proformservice.com/ registration. CUSTOMER CARE For service at any time, go to www.proformservice.com.
Page 2: Table Of Contents
TABLE OF CONTENTS WARNING DECAL PLACEMENT ............. . . 2 IMPORTANT PRECAUTIONS .
Page 3: Important Precautions
IMPORTANT PRECAUTIONS WARNING: To reduce the risk of burns, fire, electric shock, or injury to persons, read all important precautions and instructions in this manual and all warnings on your treadmill before using your treadmill. ICON assumes no responsibility for personal injury or property damage sus- tained by or through the use of this product.
Page 4 19. Always stand on the foot rails when starting page 9, and HOW TO FOLD AND MOVE THE or stopping the walking belt. Always hold the TREADMILL on page 32.) You must be able handrails while using the treadmill. to safely lift 45 lbs. (20 kg) to raise, lower, or move the treadmill.
Page 6 STANDARD SERVICE PLANS...
Page 7: Before You Begin
BEFORE YOU BEGIN Thank you for selecting the revolutionary reading this manual, please see the front cover of this PROFORM PREMIER 900 treadmill. The PREMIER manual. To help us assist you, please note the product ® 900 treadmill offers an impressive selection of features model number and serial number before contacting us.
Page 8: Part Identification Chart
PART IDENTIFICATION CHART Use the drawings below to identify small parts used for assembly. The number in parentheses below each draw- ing is the key number of the part, from the PART LIST near the end of this manual. The number following the key number is the quantity used for assembly.
Page 9: Assembly
ASSEMBLY • To hire an authorized service technician to • Left parts are marked “L” or “Left” and right parts assemble the treadmill, call 1-800-445-2480 are marked “R” or “Right.” • Assembly requires two persons. • To identify small parts, see page 8. •...
Page 10 2. Make sure that the power cord is unplugged. Remove the tie securing the Upright Wire (81) to the front of the Base (94). Next, identify the Right Upright (90). Have a second person hold the Right Upright near the Base (94).
Page 11 4. Hold the Right Upright (90) against the Base (94). Make sure not to pinch the Upright Wire (81). Attach the Right Upright (90) with two 3/8" x 2 1/4" Screws (7), a 3/8" x 1 1/4" Screw (63), a 3/8" x 1 3/4" Screw (62), and four 3/8" Star Washers (13) as shown;...
Page 12 6. Identify the Left Handrail (86). Attach the Left Handrail (86) to the Left Upright (89) with two 5/16" x 2 1/2" Screws (28) and two 5/16" Star Washers (11); firmly tighten the Screws. Insert the Upright Wire (81) through the hole in the bottom of the Right Handrail (87) as shown.
Page 13: Smooth Surface, It May Roll Forward During
8. Note: If the treadmill is assembled on a smooth surface, it may roll forward during this step. Raise the Frame (56) to the upright position. IMPORTANT: Do not raise the Frame past the vertical position. Have a second person hold the Frame until step 10 is completed.
Page 14 10. Remove the 5/16" Nut (12) and the 5/16" x 2 1/4" Bolt (3) from the bracket on the Latch Crossbar (38). Align the upper end of the Storage Latch (53) with the bracket on the Latch Crossbar (38), and insert the 5/16" x 2 1/4" Bolt (3) through the bracket and the Storage Latch.
Page 15 12. IMPORTANT: To avoid damage, do not use power tools and do not overtighten the #10 x 3/4" Screws (9). Attach the console assembly (J) to the Left and Right Handrails (86, 87) with four #10 x 3/4" Screws (9) and four #10 Star Washers (5); start all four Screws, and then tighten them.
Page 16 14. Attach the Left Handrail Cover (79) and the Right Handrail Cover (92) to the Left and Right Handrails (86, 87) with six #8 x 1/2" Screws (1); do not overtighten the Screws. 15. Slide the Left Bottom Handrail Cover (85) up against the Left Handrail Cover (79), and attach the Left Bottom Handrail Cover with two #8 x 1/2"...
Page 17 16. Firmly tighten the four 3/8" x 2 1/4" Screws (7), the two 3/8" x 1 3/4" Screws (62), and the two 3/8" x 1 1/4" Screws (63). Note: Do not overtighten the Screws (62). The Wheels need to turn freely. Next, set the Left Inner Base Cover (107) onto the lower end of the Left Upright (89).
Page 18: How To Use The Treadmill
HOW TO USE THE TREADMILL HOW TO CONNECT THE POWER CORD nominal 120-volt circuit capable of carrying 15 or more amps. To avoid overloading the circuit, do Use a Surge Suppressor not plug other electrical devices, except for low- power devices such as cell phone chargers, into Your treadmill, like other electronic equipment, can be the surge suppressor or into an outlet on the same damaged by sudden voltage changes in your home’s...
Page 19 CONSOLE DIAGRAM MAKE YOUR FITNESS GOALS A REALITY WITH FEATURES OF THE CONSOLE IFIT.COM The advanced treadmill console offers a selection of With your new iFit-enabled fitness equipment, you can features designed to make your workouts more effec- use an array of features on iFit.com to make your fit- tive and enjoyable.
Page 20 HOW TO TURN ON THE POWER HOW TO USE THE TOUCH SCREEN IMPORTANT: If the treadmill has been exposed to The console features a tablet with a full-color touch cold temperatures, allow it to warm to room tem- screen. The following information will help you become perature before you turn on the power.
Page 21 HOW TO SET UP THE CONSOLE To use the equipment settings mode, see page 27. To use the sound system, see page 29. To Before using the treadmill for the first time, set up the use the Internet browser, see page 29. To use the console.
Page 22 If you press one of the Quick Speed buttons, the As you walk or run on the treadmill, the screen can walking belt will gradually change speed until it show the following workout information: reaches the selected speed setting. • The incline level of the treadmill To select a speed setting that includes a decimal—...
Page 23 6. Measure your heart rate if desired. 8. When you are finished exercising, remove the key from the console. Note: If you use the handgrip heart rate moni- Step onto the walking platform and touch the home tor and a chest heart rate monitor at the same button or the back button on the screen or press time, the console will not display your heart the Stop button on the console.
Page 24 3. Start the workout. To pause the workout, touch either the back button or the home button in the lower-left corner of the Touch the Start Workout button to start the work- screen, or press the Stop button on the console. out.
Page 25 3. Select a set-a-goal workout. 5. Monitor your progress with the displays. To select a set- See step 5 on page 22. a-goal workout, touch the Set A 6. Measure your heart rate if desired. Goal button on the screen. See step 6 on page 23.
Page 26 4. Enter your maximum heart rate. 3. Log in to your iFit account. Touch the increase and decrease buttons to enter If you have not already done so, touch the Login your maximum heart rate. You can also adjust the button to log in to your iFit account.
Page 27 5. Start the workout. 2. Select the equipment settings mode. See step 3 on page 24. In the settings main menu, touch the Equipment Settings button. Note: Slide or ﬂ ick the screen to During some workouts, an audio coach may guide scroll up or down through the options if necessary.
Page 28 7. Turn on or turn off the display demo mode. 11. Enable or disable a passcode. The console features a display demo mode, The console features a child-safety passcode, designed to be used if the treadmill is displayed designed to prevent unauthorized users from using in a store.
Page 29 HOW TO USE THE SOUND SYSTEM HOW TO USE THE INTERNET BROWSER To play music or audio books through the console Note: To use the browser, you must have access to a sound system while you exercise, plug a 3.5 mm male wireless network including an 802.11b/g/n router with to 3.5 mm male audio cable (not included) into the jack SSID broadcast enabled (hidden networks are not...
Page 30 HOW TO USE THE MAINTENANCE MODE 4. Calibrate the incline system of the treadmill. 1. Select the settings main menu. Touch the Calibrate Incline button. Then, touch the Begin button to calibrate the incline system. The See step 1 on page 27. treadmill will automatically rise to the maximum incline level, lower to the minimum incline level, 2.
Page 31 HOW TO USE THE WIRELESS NETWORK MODE An information box will ask if you want to connect to the wireless network. Touch the Connect button The console features a wireless network mode that to connect to the network or touch the Cancel but- allows you to set up a wireless network connection.
Page 32: How To Fold And Move The Treadmill
HOW TO FOLD AND MOVE THE TREADMILL HOW TO FOLD THE TREADMILL HOW TO MOVE THE TREADMILL To avoid damaging the treadmill, adjust the incline Before moving the treadmill, fold it as described at the to zero before you fold the treadmill. Then, remove left.
Page 33: Maintenance And Troubleshooting
MAINTENANCE AND TROUBLESHOOTING MAINTENANCE c. Check the power switch located on the treadmill frame near the power cord. If the switch protrudes Regular maintenance is important for optimal perfor- as shown, the switch has tripped. To reset the mance and to reduce wear. Inspect and properly tighten power switch, wait for ﬁ...
Page 34 SYMPTOM: The incline of the treadmill does not c. Your treadmill features a walking belt coated with change correctly high-performance lubricant. IMPORTANT: Never apply silicone spray or other substances to a. Calibrate the treadmill’s incline system (see step 4 the walking belt or the walking platform unless on page 30).
Page 35 b. If the walking belt slips when walked on, ﬁ rst SYMPTOM: The tablet holder does not stay in place remove the key and UNPLUG THE POWER CORD. Using the hex key, turn both idler roller a. Rotate the tablet holder backwards. Then, tighten screws clockwise, 1/4 of a turn.
Page 36: Exercise Guidelines
EXERCISE GUIDELINES Burning Fat—To burn fat effectively, you must exer- WARNING: cise at a low intensity level for a sustained period of Before beginning this time. During the first few minutes of exercise, your or any exercise program, consult your physi- body uses carbohydrate calories for energy.
Page 37 SUGGESTED STRETCHES The correct form for several basic stretches is shown at the right. Move slowly as you stretch —never bounce. 1. Toe Touch Stretch Stand with your knees bent slightly and slowly bend forward from your hips. Allow your back and shoulders to relax as you reach down toward your toes as far as possible.
Page 38: Part List
PART LIST Model No. PFTL98115.0 R1215A Key No. Qty. Description Key No. Qty. Description #8 x 1/2" Screw 3/8" Plastic Bushing #8 x 3/4" Screw 3/8" Washer 5/16" x 2 1/4" Bolt Storage Latch 5/16" x 1/2" Screw Drive Motor...
Page 39 Key No. Qty. Description Key No. Qty. Description Tablet Holder 1/4" x 1 1/4" Screw Roller Spacer 1/4" Nut Left Inner Base Cover M5 Washer – User’s Manual Note: Speciﬁ cations are subject to change without notice. For information about ordering replacement parts, see the back cover of this manual.
Page 40: Exploded Drawing
EXPLODED DRAWING A Model No. PFTL98115.0 R1215A...
Page 41 EXPLODED DRAWING B Model No. PFTL98115.0 R1215A...
Page 42 EXPLODED DRAWING C Model No. PFTL98115.0 R1215A...
Page 43 EXPLODED DRAWING D Model No. PFTL98115.0 R1215A...
Page 44: Ordering Replacement Parts
ORDERING REPLACEMENT PARTS To order replacement parts, please see the front cover of this manual. To help us assist you, be prepared to provide the following information when contacting us: • the model number and serial number of the product (see the front cover of this manual) •...

Pro-Form PFTL98115.0 User Manual

Table of Contents

Related Manuals for Pro-Form PFTL98115.0

Summary of Contents for Pro-Form PFTL98115.0

Table of Contents