1.4.5
Securing the Device with Screws
Note
Securing with screws is not possible with the 12" touch screen variant. To secure the 19"
front panel with screws, backing plates with Order No. 6AV7672-8KE00-0AA0 are required
on the front.
Drilling Holes
Steps for drilling holes
1
2
3
Notice
Risk of Damage
Ensure that no metal cuttings enter the device when the holes are drilled. Cover the device
with film or when drilling, use removal by suction.
SIMATIC Panel PC 677
Operating Instructions (Compact), Edition 07/2006, A5E00877730-01
Drill holes (Ø approx. 2.5 mm) from the rear in the 4 recesses of the control unit
Use a Ø 5.5 mm bit for M5 and a Ø 6.5 mm bit for M6
Deburr the holes from the front of the control unit
Operating instructions (compact)
1.4 Installation / panel-mounting
1-9