Table of Contents
Advertisement
Operating instructions (compact)
1.4 Installation / panel-mounting
Rack Mounting
Steps for fastening the device with screws
1
2
3
Swivel Arm Mounting
Steps for fastening the device with screws
1
2
3
Control Cabinet Installation
Steps for fastening the device with screws
1
2
3
4
1-10
Drill the holes
Working from the front, insert the device into the 19" rack
Secure the control unit by inserting suitable screws through the holes and attaching nuts
Drill the holes
Working from the front, place the device onto the swivel arm
Secure the control unit by inserting suitable screws through the holes and attaching nuts
Drill holes at the prepared mounting cut-out in accordance with the specifications for L4 and L5,
as shown at the dimensions in the mounting cut-out
Carefully drill the respective holes in the control unit at the designated location from the rear
Working from the front, insert the device into the mounting cut-out
Secure the control unit by inserting suitable screws through the holes and attaching nuts
Operating Instructions (Compact), Edition 07/2006, A5E00877730-01
SIMATIC Panel PC 677
Advertisement
Table of Contents
