Table of Contents
Advertisement
OPERATING yOUR BREvILLE BREAd MAKER - BEGINNER'S GUIdE
a)
Lift open the lid of the Automatic Fruit and Nut Dispenser.
Touch the base of the dispenser to check that it is completely
closed before adding a maximum ¾ cup of dry ingredients. If
the base is open, see Troubleshooting, page 58.
b)
Ensure the bread pan is in the baking chamber and the lid is
closed. Loading ingredients into the dispenser without the
breadpan inserted or with the lid closed increases the risk
of ingredients falling into the baking chamber and burning
during the 'bake' phase.
c)
Always remember:
− Ingredients should be suitably sized so they do not fall
through the steam vents at the base of the dispenser.
We recommend separating ingredients that may stick
together, such as raisins and other fruits, before adding.
− Liquids should not be added to the dispenser.
− Glacé (glazed) fruits such as cherries, ginger, pineapple,
etc. should be washed and well-dried on kitchen paper
towel before adding into the dispenser.
− Bottled or canned ingredients such as olives, sun dried
tomatoes etc. should be drained and well-dried on
kitchen paper towel before adding to the dispenser.
− It is recommended that the dispenser be cleaned
thoroughly with a soft, damp cloth after each use.
d)
The Fruit and Nut Dispenser will automatically release
its contents on the BASIC, BASIC RAPID, WHOLE
WHEAT, WHOLE WHEAT RAPID, GLUTEN FREE,
CRUSTY LOAF, SWEET, YEAST FREE and all DOUGH
settings. You may notice the base of the dispenser flip
14
open during the bread making cycle even when it is empty.
This is normal. It is the dispenser automatically releasing
ingredients.
TIP
If ingredients exceed the maximum ¾ cup capacity of the
dispenser, lift open the lid and add ingredients manually
when the 'add-in' alert sounds Ensure the BEEPER button
has not been muted and the sound alerts are on - there
should be no
symbol on the LCD screen. Do not press
and hold the CANCEL button to add ingredients as this
will cancel the entire cycle.
6. Plug in the Power Cord
a)
Unwind the power cord completely and insert the power
plug into a grounded power outlet.
b)
An alert will sound and the LCD screen will illuminate. The
function options will appear with an indicator on the preset
BASIC setting.
7. Select the Setting
a)
Turn the SELECT push-dial until the indicator on the
LCD screen reaches the desired setting. Press the push-
dial to select.
b)
If you accidentally press the wrong setting, press the
CANCEL button to return to the main menu and make your
selection again.
Hide quick links:
Advertisement
Table of Contents
