System Menu - Jensen JRV215N Installation And Operation Manual

connection of ILLUM wire).
To adjust display backlight intensity, touch the "Dimming Day" and "Dimming Night" level
3.
settings.
4. After Day & Night dimming levels have been set; toggle between them by pressing and
holding the MENU (1) on the front panel. (Works ONLY if dimming control is off)
To adjust contrast and chrominance of the display, touch "Display settings" and use the
5.
on-screen arrows to adjust the levels.
6. Swipe the on-screen button to turn ON/OFF standby clock display. When standby mode is
on, the LED indicator (4) will light up.

SYSTEM MENU

Press the MENU button (1) or touch the on-screen button (8) in the home menu to access
different modes.
Table 2: Settings menu
Options
General Touch to enter the General settings menu.
Time Touch to enter the Time settings menu.
Panel Touch to enter the Panel settings menu.
Audio Touch to enter the Audio settings menu.
Camera Touch to enter the Camera settings menu.
Weather Band Touch to enter the Weather Band settings menu.
General Sub-menu
The following general sub-menu options can be adjusted
Settings
Wallpaper
FM region
DVD rating
Function
Factory reset
Software
Version
13
Table 3: General sub-menu
Options Function
-- Touch to select the wallpaper preferred.
Europe Touch to select the FM region.
United States
ADULT (default) Touch to set the parental control rating. Any content
rated above the set rating cannot be viewed.
NC-17
6R
PG-R
PG13
G
KID SAFE
Touch "Yes" to reset to factory default.
Yes
No
-- Touch to display the current software version.
MCU/APP/MEPG/BT/BSP/SERVO
JRV215N