Compensating Presser Foot; 1/4" Presser Foot - JUKI TL-2200QVP Mini Instruction Manual

Compensating presser foot

CAUTION:
Screw in the
presser foot
1/4" (7 mm) presser foot
CAUTION:
Screw in the
presser foot
28
Turn OFF the power switch when replacing the presser foot.
Presser foot
Guide
Turn OFF the power switch when replacing the presser foot.
Presser foot
Guide
It is convenient to sew material end straight.
1
Install the compensating presser foot.
2
Fit material end to guide and sew.
Guide for 1/4" (7mm) seam allowance for piecing is pro-
vided.
1
Install the 1/4" (7mm) presser foot.
Loosely attach presser foot setscrew. Then, attach
the 1/4"(7mm) presser foot and securely tighten
the setscrew.
2
Sew the material while aligning its edge
with the guide.
Stitches can be sewn at the position which is 1/4"
(7mm) away from the guide.