Adding Effects; Precautions & Safety Tips - Polaroid SNAP User Manual

To set it, press the timer button (located on
the top of the camera), then press the shutter
button. The timer button will blink white while
the timer counts down and in ten seconds,
your photo will be captured.

Adding Effects

Photo Frames
– To add a Polaroid border to your print,
press the frame button located on top of
your camera.
Color Tints
– To give your print a sepia or black and white
treatment, press the color button (located
on the top of your camera) to select the
14 | EN
color tint for your next print.
Photo Booth
– To take photos with a photo booth effect,
press and hold the shutter button for three
seconds. The timer button will blink and
the camera will take four photos in a row,
capturing a photo every four seconds. The
photos will print on one sheet with these
four consecutive images.
Precautions & Safety Tips
Turn the power off if:
– Foreign objects or water enter the camera
– The camera has been dropped or its case
has been damaged
Continued use after these issues may cause
personal injury.
Service should only be performed by a
qualified technician.
This camera isn't waterproof. It's not water-
resistant, either, so use caution when using
near water.
Do not place the camera on unstable surfaces.
Adult supervision is recommended when the
product is being operated by young children.
Do not use the camera while you are
walking, driving or riding a motorcycle.
This may result in you having an accident.
For optimal performance, use your Snap
in temperatures between 60°F and 90°F
(15.6°C and 32.2°C) and between 20% to
80% relative humidity.
Do not use the camera near sand as this
may damage the camera.
Do not fire the flash close to anyone's eyes.
This may cause damage to the person's
eyesight.
This camera is a precision instrument.
EN | 15