Timer Recording - Panasonic NV-HV62GL Operating Instructions Manual

Timer Recording

Easy Timer Programming
Up to 16 timer programmes, including weekly and daily
programmes, can be recorded up to one month in advance by
setting the timer.
Preparations
• The VCR must be turned on, or in timer recording standby
mode.
• Confirm that the TV is on and the VCR viewing channel is
selected.
• Insert a video cassette with an intact erasure prevention tab.
• Check that the clock is set to the correct time. If it has not
been set, refer to page 7.
• When [JET NAVIGATOR] is set to [ON] (See page 8), you
can set the category.
Alternatively, you can see the category on the Navigator list.
(See page 15 for details.)
Operations
In case of [JET NAVIGATOR] is set to [ON];
1 Press [PROG] (7) to display the menu for timer
programme on the TV screen.
2 Press [2 1] (28) to set the date
on which the TV programme will
be broadcast, and press [4] (28).
3 Press [2 1] (28) to select the programme position of
the desired TV station, and press [4] (28).
4 Press [2 1] (28) to set the starting time, and press
[4] (28).
• When [2 1] (28) is kept pressed, the indication changes
in 30-minute steps.
5 Press [2 1] (28) to set the ending time, and press [4]
(28).
6 Press [2 1] (28) to set the desired Rec Mode, and
press [4] (28).
• SP provides standard recording
time, optimum picture and sound
quality.
LP provides double recording time
with slightly reduced picture and
sound quality.
EP provides triple recording time
with slightly reduced picture and sound quality.
Regarding the [A] indication, refer to page 14.
When you play back a tape recorded in the EP mode, the
monaural sound may be unstable.
7 Press [2 1] (28) to select the
Category. Then, select the
desired category by pressing
[43 2 1] (28).
• When [JET NAVIGATOR] is set to
[OFF] (See page 8), proceed to
step 9.
8 Press [MENU] (9) to make the
previous display appears.
9 Press [TIMER (REC)] (14) to switch the VCR over to
the timer recording standby mode.
• When [JET NAVIGATOR] is set to [ON] (see page 8), the
• When [JET NAVIGATOR] is set to [OFF] (see page 8),
To Suspend the Timer Recording Standby
Mode
When you want to use the VCR for playback, normal
recording or some other operation before the programmed
timer recording perform, you can temporarily suspend the
timer recording standby mode by pressing the [TIMER (REC)]
(14) so that the [
and the [TIMER (REC)] (14) on the main unit put out the
lights.
However, after you have finished using the VCR, be sure to
reactivate the timer recording standby mode by pressing the
[TIMER (REC)] (14) again otherwise the programmed timer
recording will not be performed.
Weekly and Daily Timer Recording
EASY PROGRAMMING
1. DATE 1. DATE
SELECT
In step 2 of Easy Timer Programming, select the desired
2. CH 2. CH
SET
day by pressing [2] (28).
3. ON TIME 3. ON TIME
4. OFF TIME 4. OFF TIME
5. REC MODE 5. REC MODE SP
Current date
6. CATEGORY 6. CATEGORY
TIMER
7. PUSH TIMER 7. PUSH TIMER
END : MENU
Weekly:
SU=Sunday, MO=Monday, TU=Tuesday, WE=Wednesday,
TH=Thursday, FR=Friday, SA=Saturday
Daily:
Daily recording
Monday to Friday
Monday to Saturday
Sunday to Saturday
For example, SU (Sunday)
EASY PROGRAMMING
1. DATE 29WE SELECT
2
2. CH
SET
20:02
3. ON TIME
4. OFF TIME 21:30
5. REC MODE LP
6. CATEGORY
TIMER
7. PUSH TIMER
Timer Recording from an External Signal
END : MENU
Source
If timer recording is performed by a unit
connected to the Audio/Video input
sockets, select the A1 or A2 indicator
in step 3 of Easy Timer Programming
for the programme position.
CATEGORY SETTING
≥MOVIE ≥SPORT
≥MUSIC ≥CHILD
Setting other Programmes in Succession
≥DRAMA ≥NEWS
≥EDUCA ≥OTHER
≥DOCUM ≥
– – – – –
Repeat steps 1-9 of Easy Timer Programming.
END : MENU
EASY PROGRAMMING
1. DATE 29WE
SELECT
2. CH 2
SET
3. ON TIME 20:02
4. OFF TIME 21:30
5. REC MODE LP
6. CATEGORY 6. CATEGORY
TIMER
7. PUSH TIMER
END : MENU
[PROGRAMME IS COMPLETE. REMAINING
*
PROGRAMME 49.] message appears.
the [PROGRAMME IS COMPLETE.]
*
These messages will not appear if timer recording is
started immediately after [TIMER (REC)] (14) is
pressed.
] indication on the VCR display disappears
!# !#
Weekly Daily
!# the day before one month
*
message appears.
,···. Current date
On Screen Display
MO-FR
MO-SA
SU-SA
EASY PROGRAMMING
1. DATE
SU SELECT
2. CH
SET
3. ON TIME
4. OFF TIME
5. REC MODE SP
6. CATEGORY
TIMER
7. PUSH TIMER
END : MENU
EASY PROGRAMMING
1. DATE
29WE SELECT
2. CH
A2
SET
3. ON TIME 3. ON TIME
4. OFF TIME
5. REC MODE SP
6. CATEGORY
TIMER
7. PUSH TIMER
END : MENU
LSQT0869
...
13