Rear View - IBM X3610 Installation Manual

USB connectors: Connect a USB device, such as USB mouse, keyboard, or other
USB device, to either of these connectors.
CD/DVD-eject button: Press this button to release a CD or DVD from the
CD-RW/DVD drive.
CD/DVD drive activity LED: When this LED is lit, it indicates that the CD-RW/DVD
drive is in use.

Rear view

The following illustration shows the connectors and LEDs on the rear of the server.
Power supply
status LED
Power-cord connector: Connect the power cord to this connector.
Mouse connector: Connect a PS/2 mouse to this connector.
Serial connector: Connect a 9-pin serial device to this connector. The BMC can
take control of the serial port to perform text console redirection and to redirect
serial traffic, using Serial over LAN (SOL).
Ethernet connectors: Use either of these connectors to connect the server to a
network.
Ethernet link/activity LED: This LED is on each Ethernet connector. When this
LED is lit, it indicates that there is an active link connection on the 10BASE-T,
100BASE-TX, or 1000BASE-TX interface for the Ethernet port. When this LED is
flashing, it indicates that the server is transmitting to or receiving signals from the
Ethernet LAN that is connected to the Ethernet port.
Ethernet speed LED: When this LED is lit and is amber, it indicates that the
Ethernet network speed is 1 Gbps. When this LED is lit and is green, it indicates
that the Ethernet network speed is 10 Mbps or 100 Mbps.
USB connectors: Connect a USB device, such as USB mouse, keyboard, or other
USB device, to any of these connectors.
28
IBM System x3610 Type 7942: Installation Guide
Power-cord Mouse
Serial
connector connector
connector
Keyboard Video
connector connector
Systems-management
Ethernet activity LED
Systems-management
Ethernet connector
Ethernet 1 Ethernet 2
link / activity LED link / activity LED
Ethernet 1 Ethernet 1
connector speed LED
Systems-management
Ethernet speed LED
Ethernet 2
Ethernet 2
speed LED
connector
USB
USB
connector 3
connector 1
USB
USB
connector 4
connector 2