Table of Contents
Advertisement
Setup menus
USER menu
<TAPE PROTECT>
No.
400
401
402
403
404
The underline on the setting item denotes the initial setting.
<Note>
In order to protect the tape and VTR helical heads, it is recommended that the Still Timer be
set for automatic tape protection mode in 20 seconds or under.
Item
Setting
Superimposed
Superimposed
No.
display
display
STILL
0000
TIMER
0001
0002
0003
0004
0005
0006
0007
0008
SRC
0000
PROTECT
0001
DRUM
0000
STDBY
0001
STOP
0000
PROTECT
0001
DV STILL
0000
TMR
0001
0002
0003
0.5s
This selects the length of time until tape protection mode is
established when a DVCPRO tape is inserted and the unit is
5s
in STOP or STILL mode.
10s
(Unit: s = second, min = minute)
20s
30s
40s
50s
1min
2min
This selects the operation during the tape protection mode
STEP
when the unit is left standing in the still status.
HALF
0: STEP FWD.
1: HALF LOADING.
<Note>
When STEP FWD is selected, operation will be automatically
transferred to the standby OFF (half loading) mode as soon as
the unit has been left standing in the STILL mode for a total of
30 minutes (or 1 minute for DV/DVCAM cassette).
OFF
This selects the drum operation in the STANDBY OFF mode.
0: The drum stops rotating.
ON
1: The drum continues rotating.
This selects the operation in the tape protection mode when
STEP
the unit has been left standing in the STOP mode.
HALF
0: STEP FWD
1: HALF LOADING
<Note>
When STEP FWD is selected, operation will be automatically
transferred to the standby OFF (half loading) mode as soon as
the unit has been left standing in the STOP mode for a total of
30 minutes (or 1 minute for DV/DVCAM cassette).
0.5s
This selects the length of time until tape protection mode is
established when a DV/DVCAM tape is inserted and the unit
5s
is in STOP or STILL mode.
10s
(Unit: s = second)
20s
<Note>
When using the unit in tempuratures below 59 F (15 C), set
this item to 10 seconds to protect the tape and video heads.
30
Description
Advertisement
Table of Contents
