Important Notice; Product Information; Installation Tools - MTX RZRXP-10 Owner's Manual

IMPORTANT NOTICE

If you have any questions regarding wire routing in a vehicle, please contact MTX Technical Support
at 1-800-225-5689.
When connecting power and ground wires ensure that the red power wire is fused at the point
where it is connected to the vehicle's battery. Failure to do so can result in damage to the vehicle if a
short circuit develops between the vehicle connection point and the product.

PRODUCT INFORMATION

Model #
Serial #
Dealer's Name
Date of Purchase
IN THE BOX
• RZRXP-10 Amplified Subwoofer Enclosure
• EBC and EBC Extension Wire
• Mounting Hardware
(1) 1" T30 Torx Screw
(2) 1.5" T30 Torx Screws
ADDITIONAL ACCESSORIES NEEDED AND NOT INCLUDED
MTX recommends using StreetWires PS1K-10 amp kit which includes the following:
• Power and Ground Wire to Run to the Battery
• 20A ATC Fuse Holder and Fuse
• Accessory Connection Wire
• RCA Cables to Connect to the Source

INSTALLATION TOOLS

The following is a list of suggested tools needed for installation:
• Torx - T40
• Torx - T30
• Torx - T25
• 10mm Wrench or Socket
• Razor Knife
INTRODUCTION
Thank you for purchasing the MTX Audio amplified subwoofer enclosure designed for the Polaris
RZR . The easy to install subwoofer is the perfect direct fit bass solution for your Polaris
®
Congratulations and enjoy the ultimate audio experience with MTX!
FITS THE FOLLOWING VEHICLES
• RZR XP / XP4 1000 (2014 and Up)
®
• RZR XP / XP4 TURBO (2016 and Up)
®
• RZR 900 / 900S / 1000S (2015 and Up)
®
• RZR 4 900 EPS (2015 and Up)
®
NOTE: Will not fit on vehicles with the added heater accessory.
2
M T X . C O M
®
RZR .
® ®