Important Notice; Product Information; Installation Tools - MTX RANGER-10 Owner's Manual

IMPORTANT NOTICE

If you have any questions regarding wire routing in a vehicle, please contact MTX Technical Support
at 1-800-225-5689.
When connecting power and ground wires ensure that the red power wire is fused at the point
where it is connected to the vehicle's battery. Failure to do so can result in damage to the vehicle if a
short circuit develops between the vehicle connection point and the product.

PRODUCT INFORMATION

Model #
Serial #
Dealer's Name
Date of Purchase
IN THE BOX
• RANGER-10 Amplified Subwoofer Enclosure
• EBC and EBC Extension Wire
• Mounting Hardware
Top Mounting Bracket
90° Bottom Mounting Bracket
M6 14mm Bolt with Washer and Lock Washer
⁄ Self-tapping Screws
5
16
ST6.3 25mm Self-tapping Screw
ADDITIONAL ACCESSORIES NEEDED AND NOT INCLUDED
MTX recommends using StreetWires PS1K-10 amp kit which includes the following:
• Power and Ground Wire to Run to the Battery
• 20A ATC Fuse Holder
• Accessory Connection Wire
• RCA Cables to Connect to the Source

INSTALLATION TOOLS

The following is a list of suggested tools needed for installation:
• Torx - T40
• ⁄ " Socket
3
8
• Flat Blade Screwdriver
• Pry Tool
• ⁄ " Drill Bit
1
8
INTRODUCTION
Thank you for purchasing the MTX Audio amplified subwoofer enclosure designed for the Polaris
RANGER . The easy to install subwoofer is the perfect direct fit bass solution for your Polaris
®
RANGER . Congratulations and enjoy the ultimate audio experience with MTX!
®
FITS THE FOLLOWING VEHICLES
• RANGER XP 570 / 900 (2014 and Up)
®
• RANGER DIESEL (2014 and Up)
®
• RANGER 6X6 (2014 and Up)
®
• RANGER CREW
• RANGER CREW
• RANGER CREW
2
XP 570-6 (2014 and Up)
®
XP 900-5 EPS / 900-6 EPS (2014 and Up)
®
DIESEL (2014 and Up)
®
M T X . C O M
®
®