To Install And Connect The Wiring Harness - Motorola v60 Installation Instruction

6.

To install and connect the wiring harness

0
X18126
0
1
A1-A3
A4
0
1
A1-A3
A4
0
6
4
5
Retrofit kit No. 84 64 0 139 561 / 84 64 0 142 861 / 84 64 0 148 183 / 84 64 0 148 196
Installation Instructions No. 01 29 0 142 860
A5-A6
A1-A4
A7
R50 0310 Z
X18126
R50 0250 Z
X18126
R50 0249 Z
3
1
2
7
R50 0248 Z
Issue date: 07.2002
0
Lay branches A1 – A4 to the radio plug X18126 .
Insulate branches A5 and A6 and tie them back.
Lay branch A7 to the oddments box on the passenger
side.
0
Cars with a new generation radio only
Connect branches A1 – A5 as follows to plug X18126 :
- A1 SW cable to BR cable on PIN 12
- A2 RT cable to RT/BR cable on PIN 15
- A3 GN cable to VI/GR cable on PIN 16
See figure R50 0248 Z for the procedure
Crimp the socket contact (1) to branch A4 OR cable and
connect it to PIN 10 on plug X18126 .
0
Cars without a new generation radio only
Connect branches A1 – A5 as follows to plug X18126 :
- A1 SW cable to BR cable PIN 15
- A2 RT cable to RT/BR cable PIN 9
- A3 GN cable to VI/WS cable PIN 10
See figure R50 0248 Z for the procedure
Crimp the socket contact (1) to branch A4 OR cable and
connect it to PIN 4 on plug X18126 .‚
0
All cars
Cut the corresponding cable of the plug X18126 at a
suitable point.
Crimp the socket contact (1) onto the cable end (2) of
the plug and put on the socket casing (3).
Crimp the plug contact (4) onto the open cable end (5),
crimp on the corresponding branch (7) and put on the
plug casing (6).
Connect the socket and plug casings (3+6).
EN/9