Important Information - Motorola v60 Installation Instruction

Important information

The retrofit kit is only for use within the dealership organisation.
Do not kink or damage the cables during the installation work since otherwise they may cause faults that
can later only be identified by extensive additional work. The costs incurred as a result of this will not be
reimbursed.
If the specified PIN chambers are occupied, bridges, double crimps or twin-lead terminals must be used.
This system does not require coding
Target group
The target group for these installation instructions is specialist personnel trained on MINI cars with
specialist knowledge of vehicle electrical systems.
Work:
All servicing, repair and installation work on MINI cars is completed at your own risk.
All work is to be carried out using current MINI repair manuals and circuit diagrams in a rational order
using the prescribed tools (special tools) and observing current health and safety regulations.
Required special tools
None
Retrofit kit No. 84 64 0 139 561 / 84 64 0 142 861 / 84 64 0 148 183 / 84 64 0 148 196 EN/3
Installation Instructions No. 01 29 0 142 860 Issue date: 07.2002