Connecting The Camera To The Computer; Getting Photos And Videos From Your Camera To Your Computer - Vivitar DVR 32490V2 User Manual

Connecting the Camera to the Computer

1) Use the USB cable that came with your camcorder to connect your camcorder to
your computer.
2) Power the camera ON.
3) The first time you connect the device to the computer you will have to wait a few
seconds until the computer recognizes the device.
As your camera is a mass storage device "MSDC" will appear on the LCD,
4)
indicating that your camera is in Mass Storage Mode.

Getting Photos and Videos from your Camera to Your Computer

An SD card needs to be inserted. Do not disconnect the cable during transfer. Doing so
will cancel the transfer of any files on their way to your computer.
Select the "Get Images" button from the Main menu.
1)
The "Get Images from device" window opens.
2)
3) You can select to download photos, videos or both.
4) Select your camera (removable disk) from the device window. If your camera is the
only USB device connected then it will be selected automatically.
5) Select a location on the computer where to place the new photo and video files.
6) Add the new photo and video files to albums if desired.
18