Connecting The Camera To A Tv - Vivitar DVR 32490V2 User Manual

Connecting the Camera to a TV

Connect the camcorder to the TV via the supplied cable. Power on the TV and then
your camcorder. The camcorder‟s LCD screen turns blank, and picture that previously
appeared on the camcorder `s LCD screen now appear on the TV screen.
Note:
You cannot enter the TV out mode if your DV has no batteries inserted.
TV out jack
inside!
1) Connect the camcorder to a TV via the TV-out cable (supplied). The TV slot is
situated next to the USB slot at the back of the camcorder. Lift up the cover and
insert the cable.
Turn on the TV and the camcorder, and then set the TV to "AV" mode.
2)
3) When the camcorder is set to record, capture or playback mode, you can preview
the subjects you want to record on the TV screen.
4) When the camcorder is set to Playback mode, you can review all the pictures and
videos stored on the SD card inserted in the camcorder n the TV screen.
5) Do not disconnect your TV cable when capturing videos via the TV screen.
Connect to TV!
15