Making Cost-Effective Calls; Displaying Call Duration; And Charges - Gigaset S328 Operating Instructions Manual

Gigaset S440 / SWZ-engl nur fuer Internet Swisscom / xxxxxx / charges.fm / 21.07.2006

Making cost-effective calls

Making cost-effective calls
You can display the duration of calls
(in minutes) or the charges (in CHF).

Displaying call duration

and charges

Displaying the call duration and call
charges depends on whether you have
requested the transmission of metering
impulses and that the unit is set to
CHF 00.10.
Note:
When the phone is supplied, the charge per
unit is set to CHF 0.10.
The metering impulses are automatically
transmitted on the Swisscom network.
u
Transfer of counting pulses not
requested: The duration of a call is dis-
played, if the charge/unit is set to
00.00.
u
If the charge/unit and the currency are
set, you will see the charges for a call.
22
Setting the charge per unit and the
currency
¢ ¢
v í
Call Charges
¤
Change multiple line input:
Cost per Unit:
Enter charge per unit, e.g.
QQQL for 6 cents.
Currency:
Enter currency symbol.
¤
Save changes (page 11).
Note:
Previously stored call charges are deleted if the
cost per unit is changed.
Displaying/deleting call charges
¢ ¢
v í
Call Charges
q
Select entry and press
You have the following options:
Last Call
Display charges for the last call.
All Calls
Display charges for calls on all hand-
sets.
Per Handset
Display charges for calls per handset.
¢
Settings
.
§OK§