Gigaset S328 Operating Instructions Manual page 20

Gigaset S440 / SWZ-engl nur fuer Internet Swisscom / xxxxxx / directories.fm / 21.07.2006
Using the directory, VIP directory and lists
Adding a displayed number to
the directory
You can add numbers to the directory
which are displayed in a list, e.g. the call
list or the last number redial list, in an SMS
or during a call.
A number will be displayed.
¢
v
Copy to Directory
¤
Complete the entry, see page 16.
Copying a number from the directory
In many operating situations you can
open the directory, e. g. to copy a number.
Your handset need not be in idle status.
¤
Depending on the operating situation,
open the directory with s or
©
or Directory.
q
Select an entry (page 16).
Storing anniversaries in the directory
You can store an anniversary for every
number in the directory, and specify a
time when you will receive a reminder call
on the anniversary.
¢
s s (Select entry; page 16)
/
§View§ Edit
Press display keys one after the
other.
s
Jump to the
Press the display key.
§Edit§
¤
Change multiple line input:
Date:
Enter day/month in 4-digits format.
Time:
Enter the hour/minute for the reminder
call in 4-digit.
Prompt:
Select the type of signal for the
reminder and press
18
Ò
line.
Annivers.:
.
§OK§
¤
Save changes (page 11).
Note:
Reminder calls require a time stamp. If you
select an optical signal, then a time stamp is
not required and is automatically set to 00.00.
Deleting anniversaries
¢
s s (Select entry; page 16)
s
Jump to the
§Edit§ §Delete§ §Save§
Press display keys one after the
other.
Reminder call on an anniversary
A birthday reminder call is signalled on the
handset with the selected ring tone.
Press the display key to stop
§Silence§
the reminder call.
Voice dialling
You can dial numbers from the directory
by speaking the name. So that your phone
"recognises" you, you must record a voice
pattern for every name, i.e. say the name
loudly to the handset and store it.
You can also set your telephone to
announce the name of the caller instead
of ringing for an external call, see
page 41.
You can store a voice pattern for a total of
30 directory entries. Entries assigned with
voice patterns are marked with ´.
line.
Annivers.: