Panasonic KX-NS700 User Manual page 282

3.2.1 User Programming
Button
Network Direct Station
Selection (NDSS)
CTI
Primary Directory Number
(PDN)
Secondary Directory
Number (SDN)
Check-in
Check-out
Cleaned-up
Two-way Record
Two-way Transfer
One-touch Two-way
Transfer
Live Call Screening (LCS)
Voice Mail Transfer
346 User Manual
Select NDSS from Type.
Then enter the another PBX extension number in Dial (max. 16 digits
consisting of 0–9).
Note
The button may not be available depending on the networking method in
use or the settings of the PBX.
Select CTI from Type.
Select PDN from Type.
Select SDN from Type.
Then enter the extension number in Extension Number.
In Parameter Selection, specify the delayed ringing setting for calls arriving
at an SDN button.
To specify the ring tone, select the ring tone type from Optional Parameter
(Ringing Tone Type Number).
Select Check In from Type.
Select Check Out from Type.
Select Cleaned Up from Type.
Select Two-way Record from Type.
Then enter the UM group's or the voice mail group's floating extension
number in Extension Number. (The UM group's and the voice mail group's
default floating extension number is 500.
Select Two-way Transfer from Type.
Then enter the UM group's or the voice mail group's floating extension
number in Extension Number. (The UM group's and the voice mail group's
default floating extension number is 500.
Specify the number of the extension whose mailbox will be used to record
conversations using One-touch Two-way Transfer in Ext No. of Mailbox.
(For example, a secretary can record a conversation into the mailbox of a
boss.) If the cell is left empty, the extension user must specify the number of
an extension each time.
Select Two-way Transfer from Type.
Then enter the UM group's or the voice mail group's floating extension
number in Extension Number. (The UM group's and the voice mail group's
default floating extension number is 500.
Enter extension number or incoming call distribution group extension number
to Ext No. of Mailbox.
Select LCS from Type.
Select Voice Mail Transfer from Type.
Then enter the UM group's or the voice mail group's floating extension
number in Extension Number. (The UM group's and the voice mail group's
default floating extension number is 500.
Steps
)
*1
)
*1
)
*1
)
*1