Auto Operation Functions; Tape Position Display - Panasonic PV C1343 Operating Instructions Manual

To fi nd out present tape position.
Tape position is displayed for VHS-C Cassettes
type, tapes under 30 minutes, and some other
tapes, but the position is not correct.
TAPE
POSITION
1
2

Auto Operation Functions

Auto Shut Off
No broadcast signal in TV (Only when
Weak Signal Display is set to OFF),
blank tape is Played for 5 minutes
Power turns off
• This feature is canceled if any button is
pressed during above mode.
Auto Playback
Insert a tape in Power off mode
Power turns on
• Playback begins if tape has no record tab.
Auto Rewind
Tape reaches its end
Rewind Stop
Playback Auto Eject
Tape with no record tab reaches its end
Rewind Stop

Tape Position Display

Press TAPE POSITION to detect current tape
position.
• "DETECTING TAPE
POSITION" only appears the
DETECT I NG TAPE POS I T I ON
fi rst time a cassette is inserted
and it takes several seconds
for correct indication to appear.
• The present tape position
indication is displayed.
BEG I N END
Press TAPE POSITION (or wait 5 seconds)
to return to the normal screen.
(Repeat Play is "OFF")
Eject
25 25