Auto Operation Functions; Tape Position Display - Panasonic OmniVision PV-C2023-K Operating Instructions Manual

Auto Operation Functions

■ Auto Shut Off
No broadcast signal in TV (Only when
Weak Signal Display is set to OFF),
blank tape is Played for 5 minutes
➞ Power turns off
• This feature is cancelled if any button is
pressed during above mode.
■ Auto Playback
Insert a tape in Power off mode
➞ Power turns on
• Playback begins if tape has no record tab.
■ Auto Rewind
Tape reaches its end
➞ Rewind ➞ Stop
■ Playback Auto Eject
Tape with no record tab reaches its end
Rewind ➞ Stop ➞ Eject

Tape Position Display

To fi nd out present tape position.
Tape position is displayed for VHS-C Cassettes
type, tapes under 30 minutes, and some other
tapes, but the position is not correct.
Press TAPE POSITION to detect current tape
1
position.
DETECT I NG TAPE POS I T I ON
TAPE
BEG I N
POSITION
Press TAPE POSITION (or wait 5 seconds)
2
to return to the normal screen.
(Repeat Play is "OFF")
• "DETECTING TAPE
POSITION" only appears the
fi rst time a cassette is inserted
and it takes several seconds
for correct indication to appear.
• The present tape position
indication is displayed.
END
25 25