Panasonic PV C1343 Operating Instructions Manual page 23

Cancel a Timer Recording:
(Recording is in progress)
Hold down STOP for a few
seconds to cancel the Timer
Recording.
• Any future daily or weekly recordings
will be performed as programmed.
Review, Replace or Clear Program
Contents :
1
2
3
ADD/DLT
SELECT/SET
:CH UP
To Clear program...
:CH DOWN
:VOL UP
:VOL DOWN
PROG
STOP
4
Notes
• 2 minutes before Timer recording is performed, "PLEASE
PREPARE FOR TIMER REC" appears and/or the PROG
TIMER Indicator fl ashes. Be sure a cassette with record tab is
loaded and the unit is in Stop mode.
• If the start times of two programs overlap, the lower numbered
program will have priority.
• If the start time for a Timer Recording comes up during a
normal recording or One Touch Recording (page 12), the Timer
Recording will not be performed.
• If there is a power interruption of more than one minute, the
recording may not be performed or continued.
• If "INCOMPLETE" appears after all items have been set, check
all entries and make necessary corrections.
(Recording is not in progress)
Repeat steps 1 and 2 on page 22.
P DT START STOP CH SPD
1 day 9 : 00p 12 : 00a 08 SP
2 8 10 : 00a 12 : 00p 125 SP
3 10 8 : 00p 9 : 00p 10 SP
4 SU 9 : 00p 10 : 00p L LP
CANCEL : ADD / DLT
SELECT : SET :
END : PROG
To Replace program...
DATE START STOP CH
8 SAT 9:00P 12: 00A 08
TODAY
SP
----------------------------------------------
SELECT : SET :
END : PROG
P DT START STOP CH SPD
1 -- -- : -- -- : -- -- --
2 8 10 : 00p 12 : 00a 125 SP
3 10 8 : 00p 9 : 00p 10 SP
4 SU 9 : 00p 10 : 00p L LP
CANCEL : ADD / DLT
SELECT : SET :
END : PROG
Press PROG twice to exit this mode.
Press to select the
desired program.
1) Press to display.
2) Press to select and
press or to set new
program contents.
3) Press PROG.
Press ADD/DLT.
23 23