Auto Operation Functions; Tape Position Display - Panasonic PV-C921-K Operating Instructions Manual

Tape Operation (continued)

Auto Operation Functions

I Auto Shut Off
No broadcast signal in TV, blank tape is
Played for 5 minutes
➔ Power turns off
• This feature is cancelled if any button is
pressed during above mode.
I Auto Playback
Insert a tape in Power off mode
➔ Power turns on
• Playback begins if tape has no record tab.
• This feature cannot be activated when
the POWER button on the unit is turned
OFF (POWER indicator is not lit.)
I Auto Rewind
Tape reaches its end
➔ Rewind, ➔ Stop
I Playback Auto Eject
(Repeat Play is "OFF")
Tape with no record tab reaches its end
➔ Rewind, ➔ Stop, ➔ Eject

Tape Position Display

To find out present tape position and amount of
tape remaining.
Tape position cannot be detected for
C-Cassettes, tapes under 30 minutes, and
some other tapes.
1
Press TAPE POSITION
to detect current tape position.
• "DETECTING TAPE
POSITION" is displayed only
DETECT I NG TAPE POS I T I ON
when a cassette is first inserted
and it takes several seconds for
correct tape position to appear.
• The present tape position
indication and amount of tape
SLP
remaining (according to tape
R 120 MIN.
speed) is displayed.
• Tape remaining time display
BEG I N END
may not be precise.
2
Press TAPE POSITION (or wait 5
seconds) to return to normal screen.
Note
• This function cannot display exact amount of
tape remaining for tapes 30 minutes or less,
or for tapes over 120 minutes in length.
28