Panasonic KX-TG6051AL Operating Instructions Manual page 44

Useful Information
Problem
I cannot set the alarm.
While programming, the
handset starts to ring.
Battery recharge
Problem
I fully charged the battery,
but 7 continues to flash,
or 8 is displayed.
The handset display is
blank.
While charging, the charge
indicator does not light and
"Charge for 7h" is
displayed.
Making/answering calls, intercom
Problem
Static is heard, sound cuts
in and out. Interference
from other electrical units.
The handset does not ring.
The base unit does not
ring.
44
Cause/solution
L In order to set the alarm, you must first set the
date and time (page 14).
L The handset has lost communication with the
base unit. Move closer to the base unit, and try
again.
L A call is being received. Answer the call and
start again after hanging up.
Cause/solution
L Clean the charge contacts and charge again
(page 12).
L The battery may need to be replaced with a new
one (page 11).
L Confirm that the battery is properly installed.
L Fully charge the battery (page 11).
L The battery is empty. The charge indicator does
not light in order to concentrate on charging.
After about 5 minutes, the charge indicator lights
and "Charging" is displayed.
Cause/solution
L Move the handset and base unit away from
other electrical appliances.
L Move closer to the base unit.
L Turn on the clarity booster feature (page 17).
L If your unit is connected to a telephone line with
ADSL service, we recommend connecting an
ADSL filter between the base unit and the
telephone line socket. Contact your ADSL
provider for details.
L The ringer volume is turned off. Adjust it (page
28).
L The ringer volume is turned off. Adjust it (page
16).